Saturn 2009 ASTRA Manuel d'utilisateur télécharger pdf (Page 255)

{ CAUTION

Fans or other moving engine

parts can injure you badly. Keep

your hands away from moving

parts once the engine is running.

5. Check that the jumper cables

do not have loose or missing

insulation. If they do, you could

get a shock. The vehicles

could be damaged too.

Before you connect the cables,

here are some things you to

know. Positive (+) will go

to positive (+) or to a remote

positive (+) terminal if the vehicle

has one. Negative (−) will go

to the engine lift hook.

Do not connect positive (+) to

negative (−) or you will get

a short that would damage the

battery and maybe other

parts too. And do not connect

the negative (−) cable to

the negative (−) terminal on the

dead battery because this

can cause sparks.

6. Connect the red positive (+)

cable to the positive (+) terminal

of the dead battery. Use a

remote positive (+) terminal if

the vehicle has one.

7. Do not let the other end touch

metal. Connect it to the

positive (+) terminal of the

good battery. Use a remote

positive (+) terminal if the

vehicle has one.

8. Now connect the black

negative (−) cable to the

negative (−) terminal of the

good battery. Use a remote

negative (−) terminal if the

vehicle has one.

Do not let the other end touch

anything until the next step.

The other end of the negative (−)

cable does not go to the dead

battery.

9. Connect the other end of the

negative (−) cable at least

18 inches (45 cm) away from

the dead battery, but not

near engine parts that move.

Connect it to the engine lift hook.

You may need to scrape the

surface with your jumper cable

to obtain a proper ground.

The electrical connection is just

as good there, and the chance

of sparks getting back to the

battery is much less.

Vehicle Service and Care 9-71

1 2 ... 250 251 252 253 254 255 256 257 258 259 260 ... 313 314

Commentaires sur ces manuels

Pas de commentaire