Saturn ST-FP0055 Manuel d'utilisateur télécharger pdf (Page 3)

3. Close supervision is necessary when

any appliance is used by or near chil-

dren.

4. Unplug from outlet when not in use,

before putting on or taking off parts,

and before cleaning.

5. Avoid contacting moving parts.

6. Do not operate any appliance with a

damaged cord or plug or after the appli-

ance malfunctions, or is dropped or

damaged in any manner. Return appli-

ance to the nearest authorized service

facility for examination, repair, or elec-

trical or mechanical adjustment.

7. The use of attachments, including

canning or ordinary jars and processing

assembly not recommended by may

cause a risk of injury to persons.

8. Blades are sharp. Handle carefully.

9. Screw on container bottom firmly.

Injury can result if moving blades acci-

dentally become exposed.

10. Always operate blender with cover

in place.

11. Always hold jar while processing. If

the container should turn when the mo-

tor is switched ON, switch OFF immedi-

ately and tighten jar in threaded con-

tainer bottom.

12. When blending hot liquids, remove

the feeder cap from the two-piece cov-

er. Do not fill blender container beyond

the four cup level. Always begin pro-

cessing at the lowest speed setting.

13. Do not blend hot liquids in “MINI-

BLENDER” containers.

14. Do not use outdoors.

15. Do not let cord hang over edge of

table or counter, or touch hot surfaces.

16. Do not leave blender unattended

while it is operating.

SAVE THESE INSTRUCTIONS

KNOW YOUR BLENDER

This blender is designed for house-

hold use only.

COVER

The cover for your blender consists of

two parts, the plastic feeder cap (1) and

the vinyl cover (2). The cover is self-

sealing, and is made of vinyl which is

resistant to absorption of odours and

stains. The feeder cap is removable for

use as a measuring cap and provides

and opening for the addition of other

ingredients.

CONTAINER

The 5-cup (1.25 liter) container (3) for

the blender is graduated for easy meas-

urement and is molded of heat and cold

resistant material. The convenient han-

dle and pouring lid permit easy removal

of liquid mixtures while thicker mixtures

are more easily removed through the

bottom opening.

PROCESSING ASSEMBLY

Consists of three parts: (4) as a sealing

ring used as a cushion between the con-

tainer and the agitator; (5) agitator of

high-grade stainless steel; (6) a thread-

ed container bottom.

MOTOR AND MOTOR BASE

The powerful three-speed motor is the

heart of the appliance and is designed

just for this unit. It is completely en-

closed within the housing (7). The mo-

tor uses a “free-floating” feature to re-

duce noise and wear. The powerful food

processing motor can be overloaded. To

avoid this possibility, closely follow the

instructions and the quantities recom-

mendations in this book.

CARE AND CLEANING OF YOUR

BLENDER

Blender container parts are corrosion

resistant, sanitary and easily cleaned.

Before first use and after every use,

separate container parts (items 1-6)

and clean thoroughly in warm, soapy

water, then rinse and dry well. DO NOT

WASH ANY PARTS IN AN AUTOMATIC

DISHWASHER. Periodically check all

parts before reassembly. If the pro-

cessing blades are stuck or difficult to

turn, DO NOT USE BLENDER. Check by

carefully turning the blades in a coun-

terclockwise direction (opposite edges

are sharp). Blades should turn freely.

If the glass container is chipped or

cracked, DO NOT USE BLENDER. Further

use could result in the container break-

ing during use.

Use only recommended replacement

parts available at an authorized service

station.

USE OF DAMAGED OR NON-

RECOMMENDED PARTS COULD RESULT

IN A SEVERE PERSONAL INJURY

AND/OR DAMAGE TO THE BLENDER.

See next page for proper container as-

sembly in user instructions.

NEVER IMMERSE THE MOTOR BASE IN

WATER. Unplug unit. The housing can

be cleaned with a damp cloth.

The motor is permanently lubricated

and does not require any additional lu-

brication.

ANY SERVICING SHOULD BE PER-

FORMED BY AN AUTHORIZED SERVICE

FACILITY.

KNOW YOUR BLENDER

CAUTION: Follow these important

steps to assemble, tighten, and

mount blender container quickly

and correctly. INJURY MAY RESULT

IF MOVING BLADES ARE ACCI-

DENTALLY EXPOSED.

ASSEMBLY OF CONTAINER

1. Turn container upside down so the

small opening is at the top.

2. Place sealing ring on container open-

ing.

3. Turn the agitator blades upside down

and place in mouth of container.

4. Thread container bottom to container.

Engage threads properly. Screw on firm-

ly.

ASSEMBLY OF MILL

Turn mill upside down, and remove

blade base.

Place ingredients in. Make sure the cor-

rect packing is placed properly.

Tightly screw the correct blade base

onto container.

1 2 3 4 5 6 7 8 ... 23 24

ST-FP0055 1

Commentaires sur ces manuels

Pas de commentaire

Saturn ST-FP0055 Manuel d'utilisateur Page 3

Commentaires sur ces manuels